PENTENS T-200H is based on a newly developed Water based Polyurethane and Acrylic Polymers. It is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings.
PENTENS T-200 is a newly developed Acrylic polymer waterproofing coating offering a hardness and durability.It resists ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness, and remains flexible at low temperatures.
PENTENS T-300 is highly flexible, thixotropic two pack material consisting of high solids polymer with modified cement bound mineral powder. PENTENS T-300 is free from chlorides and any other corrosive substances.
PENTENS T-304 is high elastic, thixotropic two pack material consisting of high solids polymer with modified cement bound mineral powder. PENTENS T-304 is free from chlorides and any other corrosive substances.
PENTENS T-305TH is a cement based waterproofing coating incorporates 2 polymer components.
PENTENS E-10 A reactive two-component water based epoxy system with extremely low V.O.C. (volatile organic carbon). E-10 is safe to use in sensitive locations is environmentally friendly.
PENTENS E-620F A pigmented, reactive two-component system, consisting of water-emulsified epoxy resin and it is environmentally friendly with extremely low V.O.C. (volatile organic compound)
PENTENS E-501LN Tank Lining Epoxy is a 100% solids modified epoxy coating designed for high performance waterproofing, chemical resistance and traffic compatibility under a wide range of application and service conditions.
PENTENS E-501S A high strength, excellent adhesion, ready-to-use, solvent-free, two-part epoxy putty filler, and it is environmentally friendly with extremely low VOCs (Volatile Organic Compounds).
PENTENS E-610CR is a 100% solids, pigmented , two-component solvent free epoxy resin. It is highly resistant to acids, alkalis and a broad range of chemicals.
PENTENS NPU-12 is a nanotechnology HDI based polyurethane coating of finest quality, durable, water repellent, fungus/algae/bacteria resistant, UV resistant, scratch resistant, anti-corrosive sealer, primer & finish for a wide variety of exterior and
PENTENS T-009 is a PMMA-silylated polymethylmeth-acrylate resin based coating of good hardness, adhesion, wear resistant, scratch resistant, UV resistant, anticorrosive sealer, primer & finish for a wide variety of exterior and interior surfaces.
PENTENS T-206 is a specially produced by new type of acrylic resin compound for use on both internal and external wall.
PENTENS T-250 Art Coat is a special technology with use multi-color paint to imitation marble or granite. Improve the workability of colorful paint. Provide designers and developers with different choice in the walls and floor of expression.
PENTENS T-202 is a single component, water-based, ready mixed, PU-acrylic based, coarse textured decorative and protective coating finish over prepared concrete, masonry and steel structures.
PENTENS 603 is one part acetoxy cure, widely used for glazing and sealing and weatherproofing in all building, modular house, freight container, roofing and cladding joint. Excellent adhesion to glass, aluminum, ceramic. Painted surface, most metals,
PENTENS 605 neutral cure silicone sealant widely used for glazing, sealing and weatherproofing in all buildings, modular houses, freight containers, roofing and cladding joints. Excellent adhesion to glass, aluminum, ceramics, painted surface,...
PENTENS 607 is a white acrylic based carck filler in paste form for application from a cartridge.
PENTENS FLEX-609 single component polyurethane, cures to form a soft elastomeric weatherproof seal and it is specifically designed for aterproofing and sealing of external and internal expansion and construction joints in buildings and engineering..
PENTENS PU-130 is a two component, 1:1 ratio, closed-cell polyurethane foam insulation system which when processed through suitable spray machinery (Grace etc.) will produce a solid foam with exceptionally good compressive strength.
PENTENS T-810S contains aggregate that is natural or synthetic which weighs less than others. The lightweight is due to the cellular or high internal porous microstructure, which gives this type of aggregate a low bulk specific gravity.
PENTENS HP-023 Very powerful, extremely lightweight injection pump for the complete line of PENTENS injection grouts.
PENTENS HT-300 consists of Carbon Fiber Sheet and Epoxy based impregnating resin PENTENS E-500A/B, is a very fast and cost effective structural strengthening system that works exceptionally well in all aspects of civil infrastructure repairs.
PENTENS T-800 is a ready to use rich blend of special cements and chemical in single part dry powder form needing only the addition of clean water to produce an ultra fast setting mortar.
PENTENS T-802 A blend of hydraulic cements, wellgraded sands and chemical additives supplied in dry powder form to seal concrete, and masonry as a rapid setting remedy to plug active water instantly.
PENTENS T-805 is a ready to use rich blend of cements and shrinkage compensating agents requiring only the addition of water to produce a free-flowing, high strength grout.
PENTENS PU-101 Hydrophilic Polyurethane Grouting is used to stop leaks and fill underground voids.
PENTENS PU-107 A 100% solid hydrophobic polyurethane grout. When it mixed with PENTENS PU-10, Hydrophobic Polyurethane Grout Catalyst.
PENTENS T-308 is added to batches of concrete during the mixing process for new construction projects. The high-growth organic component of the product reacts with water and unhydrated particles in concrete to form millions of needle-like crystals.
PENTENS T-308-M A reactive crystalline type waterproofing material which creates long chained complexes a non-soluble crystalline to seal concrete pores and capillary tracks.
PENTENS MPU-111 is a solvent free, two component, high performance,cold-applied pure polyurea coating with longer pot life to allow manual applications.
PENTENS SPU 1000 is a solvent free, two-component pure polyurea spray coating. The seamless coating provides an elastic yet tear resistant surface for applications subjected to extreme wear and tear, strong impact and chemical exposure.
PENTENS R-302 is modified by silicon fluoride/silylated and resin for a wide variety of exterior and interior surfaces.
PENTENS ECO-600TR is a special formulated two-component solvent-less epoxy transparent coating which is good abrasion resistant, chemical resistant, high polish gloss floor protective coat.